4-Bay 2.5”/3.5” SATA III HDD/SSD Hardware RAID Storage
 

USB 3.1 Gen 1 , eSATA , Hot-Swappable Drive, LCM  

 

 
 
 

 

All new design, a cost-effective hardware RAID solution

 
The SR4-SB3+ is an all in one hardware RAID solution that embeds the JMB394 RAID controller chipset that require no extra parts. It’s cost effective because no separate RAID controller is required with everything built into the system.

 


Real-Time Recover

 

The SOHORAID SR4-SB3+ is a four drive storage system with JBOD / RAID 5 / RAID 0 storage option for storing contents in large scales. Industrially designed with aluminum exterior that’s built tough and durable for hard drive protection of the highest grade.
 
Stardom SR4 enables you to reliably and efficiently back up your documents, family photos, event movies, downloaded files, or other digital assets. If a hard drive happens to fail, simply swap out the defective drive and replace with a new one.  You can keep working on your projects and SR4 will automatically rebuild the data in the background.

Features

Two connectivity for Mac & PC


 
With high-speed 3G e-SATA and USB 3.1 Gen 1 two connectivity, the SR4-SB3+ can be used in both Mac & PC environments providing great convenience and flexibility.

Advance USB 3.1 Gen 1 connectivity built-in


  
The original purpose of the USB (Universal Serial Bus) is most commonly used for computer to communicate with other computer peripherals and electronic devices. But this is now vastly changing with the newest breakthrough USB 3.1 Gen 1 that’s ten times faster then the USB 2.0. With this incredible performance, creative professionals can now be able to handle much more with greater speed and shorter waiting time. USB 3.1 Gen 1 supports plug & play and is compatible with USB 3.1 Gen 1 for Mac or PC.

Big storage volume for your creative contents

 
SR4-SB3+ holds any capacity of SATA hard drives up to 10TB or more per drive bay. With all drive bays installing 10TB or more drives, in RAID 0 mode, the system will give you a total of 40TB or more in volume for storage, and under the RAID 5 mode, a total of 30TB or more in volume for storage with a single drive used for redundancy.

RAID 5 for data safety & RAID 0 for high-speed performance


 
SR4-SB3+ provides two storage options of RAID 5 or RAID 0. With RAID 5, a user will have the maximum protection of his/her data with allowance for a single drive failure but yet all data will be kept intact. In the RAID 0 mode, a user will have the benefit of a single massive volume for storage with high I/O speed, with sets of data being striped across the four enclosed drives.

 

Mechanism

SR4-SB3+ to support both of 3.5" HDD and 2.5" HDD & SSD products

 

SR4-SB3+'s 4-bay chassis provides you an up to 40TB storage capacity and supports any kind of storage disk platforms, both of 3.5" and 2.5" SATA/SSD HDD products.  It's strong aluminum extrusion chassis provides you an excellent protection at your 4 storage disks which you could fully rely on it for your daily heavy-duty works.

User-friendly display


 
Equipped with clear readable LCD display and LED indicators for system monitoring during operation so users can easily grasp the status of the system at all times. Moreover, it comes with visual and audio alarms whenever failure occurs.

Tough and durable shielding body


 
The SR4-SB3+ beats any compact four drive systems with its seamless, a thick full aluminum built body that’s robust to withstand the most demanding of use. With aluminum body, the system dissipates heat faster for a greater stability and performance that also extends the lives of the drives.

SMART cooling and the buzzer adjustment​ function 


 

SR4-SB3+ is also designed with the MCU feature which monitors and helps improving its in-chassis system temperature.  While the system temperature rises up to 50 degree-C (122 degree-F), MCU will bump up the fans with full speed; and once system temperature goes up to 55 degree-C (131 degree-F), the buzzer will alert. And you could manually adjust fan switch on the rear, MCU would reduce the fan speed down to SMART speed for a better green user environment from a less fan noise and lower power consumption.

 

In addition, if the fan fails or the device temperature is too high, the buzzer will beep and let the user know that the device has failed. The user can turn off or turn on the buzzer through the mute adjustment switch on the back panel.

Compatible with Time Machine


 
SR4 is also compatible with Apple’s Time machine to backup your critical system files, applications, data files, music, pictures, videos and more.

Application

Use S2F product extends All Your Storage Products

 

SR4-SB3+ and S2F combination eSATA and FireWire 800 interface extends your storage,From your only Firewire Mac to connect to Non-FireWire device, S2F provides you a great flexibility to choose a good storage product from STARDOM. And also, S2F could not only connect to one Non-FireWire STARDOM storage product but one more storage thru a second FireWire 800 port.
 
(S2F only for RAID mode and a single hard drive in JBOD mode) 
 
More S2F product information  >>>>

Just to use SR4-SB3+ for data backup


 
You can also easily extend your legacy device with USB 3.1 Gen 1 interface, which connects to a iMac Pro device with USB 3.1 Gen 1 interface. Your iMac Pro could connect to one SR4-SB3+ for a huge memory storage capacity thru its high performance USB 3.1 Gen 1 interface.  You could definitely enjoy its huge memory capacity together with the RAID 5 for an excellent data protection.

Product View

Specification

Specification


 
Model No SR4-SB3+/SR4-SB3+B
Interfaces USB 3.1 Gen 1 Port ( up to 5 Gbps ) / e-SATA Port ( up to 3 Gbps )
Compatible Drive 4 x 3.5"/2.5" SATA III HDD/SSD ( up to 6 Gbps )
Storage Mode Independent ( JBOD ) / RAID 5 protected / RAID 0 high-speed
System Monitoring Drive and data rebuilding failures,
System temperature, Fan failure,
Hard drive failure.
Operating System 
Support
Windows 7 or above, OS X 10.10 or above, Linux
Cooling System 8 cm Low noise fan
Electrical and
Operating 
Requirements
* Line voltage: 100-240V AC
* Frequency: 50Hz to 60Hz, single phase
* Maximum continuous power: 150W
* Operating temperature: 32° to 104° F (0° to 40° C)
* Storage temperature: -4° to 116° F (-20° to 47° C)
* Relative humidity: 5% to 95% noncondensing
Size and Weight Height: 166 mm    Width: 124 mm    Depth: 210 mm    Weight: 3.0 kg
Product Code SR4-SB3+
EAN:4713227440424
UPC:884826504603

SR4-SB3+B
EAN:44713227440486
UPC:884826504665
Carton 4 pcs per carton
Package Accessories * SR4-SB3+ x 1  (with removable drive tray enclosed x 4)
* USB 3.1 Gen 1 Cable x 1
* e-SATA Cable x 1
* Power Cord x1
* Accessory Kit 
* Quick Installation Guide x1

 

Related Products

 

 

SR2-SB3+

ST2-SB3

SR4-SB3+

 

 

>>>>  More Internal RAID Module

SR4-SB3+ (EOL) Download

Datasheet
QM
UM
CE & FCC
other
SR4-SB3+ (EOL)
Download
Download
Download
Download
Firmware & RAID Manager download (Improve stability for RAID rebuilding function,for only SR4-SB3+)

SR4-SB3+ (EOL) Question & Answer

  • Q1Could I install the firmware of SR4-SB3+ to other products which is under Stardom SR4 Family?
 

RaidonTek.com (stardom.com.tw) uses cookies to improve site functionality and your overall experience by storing necessary information for service delivery. By continuing, you consent to our use of cookies as detailed in our Privacy Policy, which provides more information about this usage. (Accept cookies to continue browsing the website)