8-Bay 2.5” SAS/SATA III HDD/SSD Hardware RAID Storage 


2 Thunderbolt™ 3 ports, Charging, 1 Mini DisplayPort, Hot-Swappable Drive 

 

A stand-alone hardware RAID could let your Mac & PC work more efficiently


 
DR8M-TB3 is built-in the easy-to-use hardware RAID, and it won’t hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity. DR8M-TB3 with RAID 5 or even RAID 6 feature would be your best cost-effective storage solution at both of data protection and the system performance.

 

It's really easy for you to set up your new buy DR8M-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface.  You could choose one of the following 8 different RAID modes, RAID 0, 1, 5, 6, 10, 50, 60 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

To support monitoring, buzzer, email notification, and S.M.A.R.T. features

 

The Marvel MSU Utility could help monitoring the RAID status while your DR8M-TB3 is working, and alert you thru beeping sound from a loud buzzer, and sending you a warning message thru e-mail system.  MSU also records all the product status in detailed and helps testing your HDD quality thru its built-in S.M.A.R.T. testing software for you.
 
 

To support "SPARE" and "MIGRATE" features

 

Marvell MSU Utility provides "SPARE" feature which lets you set up a spare HDD/SSD as a redundant storage.  Once any of your HDDs becomes defective, "SPARE" helps protecting your data thru transferring your data from that defect to the free HDD/SSD.

MSU Utility also gives you a very smart feature, called "MIGRATE".  "MIGRATE" lets you easily change your RAID setting. You no need reset your new RAID storage, and just only use "MIGRATE" function of MSU Utility, to migrate easily your RAID configure.

 

 

Adjust performance according to application flexibility
  

DR8M-TB3 use Marvell software, to adjust the hard drive and DR8M-TB3 transfer data via the "stripe size" function, so that DR8M-TB3 based on your use "stripe size" to achieve the most stable and fastest performance.

Thunderbolt 3.0 brings you an extreme high data transfer speed
 

DR8M-TB3 supports Thunderbolt 3.0 (TB3) interface for an extreme high data transfer speed.  And both of the two TB3 ports are equipped with a up to 40Gb/s data transfer rate which is 4 times faster than USB 3.1 Gen 2 ,2 times faster than Thunderbolt 2.0 and even 8 times than SATA III interface.  You could definitely use it to play your 4K high-resolution films with no any lagging hassle.  Thunderbolt 3.0 interface not only brings you this high data transfer rate advantage, it also let you chain maximum up to 6 products (or other compatible storage products).

 

RAID 0 mode to help an efficiency

 

DR8M-TB3 provides RAID 0 mode, and pluses its Thunderbolt 3.0 interface protocol, it really gives you an excellent data transfer performance up to 1300MB/s.  It helps your heavy duty video or photos editing works in your Post-production studio.

RAID 5 mode provides highest data parity function ensure your data security


 
RAID 5 mode provides both of the read-&-write efficiency and the data protection features for your daily works. Under RAID 5 mode, DR8M-TB3 would need at least 3 or more HDDs to start working.  And if anyone of your HDDs is defect, your DR8M-TB3 would still work fine for you, but just with no more data protection feature. Comparing to RAID 0 and RAID 1 modes, it's no doubt that RAID 5 is your best choice.

RAID 6 mode, double security is an even better solution in enterprise

 

To you, an Enterprise MIS supervisor, the data protection feature would be your first priority to choose your storage product.  Comparing to RAID 5, RAID 6 provides you a way better data protection level.  Under RAID 6 mode, DR8M-TB3 would need at least 4 HDDs to start working.  RAID 6 mode provides you the even better data protection than that of RAID 5's from its extremely ZERO Possibility that two HDDs become defect at the same time!  DR8M-TB3 still works perfect even though two of the whole HDDs are defect at the same time which won't happen at all!

Thunderbolt™ 3 The USB-C that does it all

 

All our Thunderbolt3 products support USB-C type connector and you could always use it to charge not only your mobile phone but notebook thru its 15W 5V/3A PD (Power Delivery) feature.

 

All our Thunderbolt 3 products also support a Mini DisplayPort which gives you a very easy way to connect to your display device.  This Mini DisplayPort is fully complaint to all the existing DVI, HDMI, and VGA display devices thru an adapter.

 

More Thunderbolt™ 3 features >>>>

 

DR8M-TB3 to support 2.5" HDD & SSD products

 

To bundle with eight new easy-to-use Trays, DR8M-TB3 supports any kinds of 2.5" HDDs/SSDs.  And also, DR8M-TB3's aluminum housing help protecting your data from its solid structure design and the excellent heat dissipation.

 

Since this new easy-to-use Tray is dimensional compliant to all our Stardom products, you could easily transfer your data among different storage devices.  And also, its key lock design could provide a double protection at your data from any improper Tray extracting.

Two die-casting rackmount ears to help moving your DR8M-TB3 easily
 

The two aluminum die-casting rackmount ears are strong enough for you to move DR8M-TB3 easily among your system racks in your server room!

The solid aluminum chassis pluses two powerful low noise Fans
 

 

DR8M-TB3's solid chassis is made by a 1.2 mm thickness aluminum-alloy plate.  And its aluminum housing and the two 4 cm FANs (with safe FAN GUARDs) really help an efficient heat dissipation for your long time use.

To support SGPIO feature (Serial General Purpose Input & Output)

 

DR8M-TB3 provides the SGPIO (Serial General Purpose Input & Output) features.   The SGPIO feature detects the following system failure symptoms: by different LED signal, user is easily to find out which HDD(s) defect to ensure DR8M-TB3 running smoothly.

MCU feature to provide you in-chassis temperature control


DR8M-TB3 is also designed with the MCU feature which monitors and helps improving its in-chassis system temperature.  While the system temperature rises up to 55 degree-C (131 degree-F), MCU will bump up the 4 cm fans with full speed; and once system temperature goes down to 50 degree-C (122 degree-F), you could manually adjust fan switch on the rear, MCU would reduce the fan speed down to a half speed for a better green user environment from a less fan noise and lower power consumption.

The built-in power supply unit


DR8M-TB3 uses conform with safety regulation certified 250W power supply unit which provides a stable and high efficient power output and definitely satisfies the big power consumption from all 8 HDDs.

Thunderbolt 3 With DR8M-TB3 Stylish and rugged
  
  
The DR8M-TB3 has a sleek exterior design that will never go out of style when placed next to your Mac. It’s also built tough with 1.2 millimeter thickness aluminum to shield the enclosed drives durably and to dissipate the heat created by the drives for the drives to work comfortably.

Just to use DR8M-TB3 for data backup
 
You can also easily extend your legacy device with Thunderbolt 3 (USB-C) to Thunderbolt 2 adapter, which connects to a Mac Pro device with Thunderbolt 2 interface. Your Mac Pro Cylinder could connect to one DR8M-TB3 and chain to more DR8M-TB3 products for a huge memory storage capacity thru its high performance Thunderbolt 3 interface.  You could definitely enjoy its huge memory capacity together with the RAID 5 or even RAID 6 setting for an excellent data protection.

 

(You need an adapter, let you connect TB2 and TB3 devices.)

Help you to achieve various photos editing 

 

Since DR8M-TB3 provides two Thunderbolt 3 ports, just use your MacBook Pro via TB3 interface, you could set up your own full function photo studio right away.  You could then save tons of RAW images.  And of course, you could edit and process the images quickly once you set up your DR8M-TB3 with RAID 0 feature.  

The standard Rackmount chassis


 
Even though it's a standard 1U-19" rackmount chassis size, DR8M-TB3 still has a fashion ID to match your Mac or PC while standing beside it.  It's well protected under its 1.2 mm aluminum chassis which also helps dissipating heat too!
 
 

More DR8-TB3 product information  >>>>

You could pile up them together for space saving
 

DR8M-TB3 is designed for you to pile them up together firmly.  It occupies only for two A4 paper size at your desk if you pile them up together.  And of course, you could mount DR8M-TB3 at your server rack too!

To meet and fit the standard 1U-19" server rack


 
You could easily install your new DR8M-TB3 into your standard 1U-19" server rack for both of server and workstation applications.

Being with a transportable case, DR8M-TB3 travels with you to anywhere


 
It's no longer a tough work for you to travel with the DR8M-TB3 unit(s).  You just need a transportable case to carry it with you for trip!  The full aluminum DR8M-TB3 chassis helps reducing the total weight for your travelling.

Product View

Specification


 
Model No DR8M-TB3-B
Interfaces
Thunderbolt 3 Port x 2( up to 40 Gbps ), Support 15W (5V/3A) Power Delivery.
Mini DisplayPort x 1
Compatible Drive 8 x 2.5" SAS/SATA HDD/SSD ( up to 6 Gbps ) /
Support large volume up to 10TB
Certification CE/FCC
Storage Mode RAID 0, 1, 5, 6, 10, 50, 60 and JBOD
Operating System 
Support
Windows 7 or above, Mac OS X 10.10 or above
Cooling System 4 cm Low noise fan x 2
Electrical and 
Operating 
Requirements
* Line voltage: 100-240V AC
* Frequency: 50Hz to 60Hz, single phase
* Maximum continuous power: 250W
* Operating temperature: 41° to 95° F (5° to 35° C)
* Storage temperature: -4° to 113° F (-20° to 45° C)
* Relative humidity: 5% to 95% noncondensing
Size and Weight Height: 44 mm   Width: 427 mm    Depth: 326.8 mm  Weight: 5.05 Kg
Product Code DR8M-TB3-B
EAN Code : 4713227440325
UPC Code : 884826504504
Carton 2 pcs per carton
Package Accessories * DR8M-TB3 x 1 ( with removable drive tray enclosed x 8 )
* Thunderbolt Cable x1
* Power Cord x1
* Accessory Kit
* Quick Installation Guide x1

 

DR8M-TB3-B Download

Datasheet
QM
UM
CE & FCC
Photo
other
DR8M-TB3-B
Image Download MSU Utility,MSU Utility Manual & Driver Download & note

DR8M-TB3-B Question & Answer

 

DR8M-TB3-B HD Compatible List

Product Name BrandHD TypeHD CategoryModel NumberCapacity Note
DR8M-TB3-BHGST3.5" HDDUltrastarHUH728080ALE6008TB
DR8M-TB3-BHGST3.5" HDDUltrastarHUS726060ALA6406TB
DR8M-TB3-BHGST3.5" HDDUltrastarHUS726060ALE6106TB
DR8M-TB3-BHGST3.5" HDDUltrastarHUS724040ALA6404TB
DR8M-TB3-BHGST3.5" HDDUltrastarHUS724040ALE6404TB
DR8M-TB3-BHGST3.5" HDDUltrastarHUH721010AL520010TB
DR8M-TB3-BKingston2.5" SSD SHSS37A240GB
DR8M-TB3-BSamsung2.5" SSD 850 Pro128GB
DR8M-TB3-BSeagate2.5" SAS HDD ST9146803SS164GB (SAS)
DR8M-TB3-BToshiba2.5" HDD MK6459GSX640GB
DR8M-TB3-BToshiba3.5" HDD MG04ACA50DE5TB
DR8M-TB3-BToshiba2.5" HDD MK5055GSX500GB
DR8M-TB3-BToshiba2.5" HDD MQ01ABF050500GB
DR8M-TB3-BToshiba2.5" HDD MQ01ACF050500GB
DR8M-TB3-BToshiba2.5" HDD MQ01ABF050500GB
DR8M-TB3-BToshiba3.5" HDD MG03ACA4004TB
DR8M-TB3-BToshiba3.5" HDD MG03ACA3003TB
DR8M-TB3-BToshiba3.5" HDD DT-01ACA-3003TB
DR8M-TB3-BToshiba3.5" HDD MG04ACA200E2TB
DR8M-TB3-BToshiba3.5" HDD DT-01ACA-2002TB
DR8M-TB3-BToshiba3.5" HDD MK2002TSKB2TB
DR8M-TB3-BToshiba3.5" HDD DT-01ACA-1001TB
DR8M-TB3-BToshiba3.5" HDD MK1002TSKB1TB
DR8M-TB3-BToshiba2.5" HDD MQ01ABD1001TB
DR8M-TB3-BToshiba2.5" SAS HDD 14SEB120N1.2TB
DR8M-TB3-BWD3.5" HDDGoldWD8002FRYZ8TB
DR8M-TB3-BWD3.5" HDDGoldWD6002FRYZ6TB
DR8M-TB3-BWD3.5" HDDBlackWD5003AZEX500GB
DR8M-TB3-BWD3.5" HDDBlueWD5000AAKX500GB